Be inspired
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2003
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
A52
nts
Call with record no. ................ 23
Edit entry ............................... 23
Location ................................. 24
Clock ......................................49
Security ..................................50
Network .................................51
In-
e end
ser
See also Index at the end of this User Guide
2
SAR - European Union (RTTE) ... 70
Guarantee certificate (UK) ....... 75
Guarantee certificate (IRL) ....... 76
Index ........................................ 77
See also Index at the end of this User Guide
3
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
ons
Remember to comply with legal
requirements and local
Only use original Siemens
batteries (100 % mercury-free)
and – charging devices.
Otherwise you risk serious
damage to health and property.
The battery could explode, for
instance.
restrictions when using the
phone. For example in
aeroplanes, petrol stations,
hospitals or while driving.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more infor-
mation consult your doctor.
You may only open the phone
tore place the battery (100 %
mercury-free) or SIM card. You
must not open the battery under
any circumstances. All other
changes to this device are
strictly prohibited and will
invalidate the guarantee.
Important:
The SIM card may be removed.
Caution! Small parts like this
could be swallowed by young
children.
Please dispose of unwanted
batteries and phones as
permitted by the laws in your
country.
The mains voltage specified on
the power supply unit (V) must
destroyed.
The phone may cause
interference in the vicinity of TV
sets, radios and PCs.
Use only Siemens original
accessories. This will avoid
potential risks to health or
property andensurecompliance
with all relevant regulations.
The ringtone (p. 43), info tones
(p. 44) and handsfree talking
are reproduced through the
loudspeaker. Do not hold the
phone to your ear when it rings.
Otherwise you risk serious
permanent damage to your
hearing.
Improper use will invalidate the guarantee!
4
Overview of the phone
w of
ne
c Integrated antenna
Do not interfere with the phone above the
battery cover unnecessarily. This reduces
the signal strength.
‚
d Loudspeaker
s
e Display indicators
_
g
ƒ
Signal strength/battery level.
Service provider
17.09.2003 09:15
New SMS Menu
f Soft keys
Press the soft key to call up the function that is
displayed as §Text§ or icon on the grey fields
above the key (see also p. 56). These are in
standby mode (factory default):
„
ꢀ
§New SMS§ or e.g.
†
}(SIM services) and
1
def
§Menu§ (main menu).
3
abc
jkl
2
5
8
ghi
6mno
4
A
g
Call key
‡
pqrs
7
wxyz
9
Dial displayed phone number or name, accept
tuv
calls.BIn standby mode: Display the last calls.
0
h
On/Off/End key
• Switched off: hold down, to switch on.
• During a conversation or in an application:
press briefly to finish.
• In menus: press briefly to go back a level.
Hold down, return to the standby mode.
• In standby mode: hold down, to switch off
phone.
i Input keys
Numbers, letters.
5
Overview of the phone
c Scroll key
In lists and menus:
Scroll up and down.
G
During a call:
Up: volume adjustment.
Down: open Phonebook.
s
E
_
g
In standby mode:
Service provider
Up: read new message.
17.09.2003
New SMS
09:15
Menu
E
F
Down: open Phonebook.
Edit Text:
Short press at top or bottom:
move cursor character by char-
acter.
Long press at top or bottom:
move cursor word by word.
G
G
1
def
3
abc
2
5
8
ghi
6mno
4
jkl
pqrs
wxyz
7
9
tuv
Read Text (e.g. SMS):
0
ƒ
‚
„
Scroll line by line.
G
*
d
Hold down
ꢀ
• In standby mode: switch on/off all signal
tones (except alarm).
• For incoming calls: only switch off ringtones.
#
e
Hold down
In standby mode: switch key lock on/off.
f Microphone
g Device interface
Connection for charger, headset etc.
6
Display symbols (selection)
Display indicators
Left and right soft key
]
Signal strength.
Charging.
_
Message received.
Voice mail
n)
h
d
\
received.
Battery level.
Unanswered call.
ꢂ
All calls are diverted.
n
j
k
T
SIM memory full.
Ringer off.
SIM services.
}
ꢃ
Short ringer (beep) only.
Store in Phonebook.
Retrieve from Phonebook.
T9 word selection.
Ringer only, if the caller is stored
in the Phonebook.
·
l
»
Alarm clock active.
y
µ
Key lock active.
Phone numbers/names:
On the SIM card
¢
On the SIM card (PIN 2
protected).
¡
In the phone memory.
v
No network access.
Function activated/deactivated.
Phonebook.
²
p,o
Q
ABC/
Indicates whether upper- or
lower case letters are active.
Abc/abc
™
Text input with T9.
Loudspeaker Car Kit.
ꢀ
Headset active.
ꢁ
Auto answer feature on.
±
7
Getting Started
The front and back covers of the casing (CLIPit™ Covers, my-CLIPit™: p. 15 and
p. 73) as well as the keypad can be changed in a matter of seconds - no tools
required. Please switch the phone off first.
To attach
s
s
f
e
d
3
o
n
m
6
c
b
a
z
y
x
2
w
9
l
jk
5
1
v
i
tu
h
g
8
4
rs
q
p
0
7
To remove
s
ff
e
eff
e
d
d
e
oo
n
33
n
mmnnoo
66
cc
b
bcc
wwxxyyzz
b
a
2
a
b
99
l
l
ll
j
j
k
k
s
v
tuv
5
8
i
1
s
h
ghi
0
4
rs
q
pqrs
7
def
3
mno
6
abc
2
wxyz
jkl
9
5
1
tuv
ghi
8
4
pqrs
0
7
f
e
de
f
o
3
n
3
mno
6
c
c
wxyz
9
b
ab
l
2
jkl
v
5
tuv
8
i
i
1
1
h
gh
0
hi
4
rs
q
rs
rs
pq
7
Note
Your phone's display and the display on the top shell are delivered with a protective film.
Remove this film before getting started.
In rare cases the static discharge may cause discolouration at the edges of the display.
However this will disappear within 10 minutes.
To avoid damage to the display, the phone should not be used without the top shell.
8
Getting Started
• Insert SIM card in the opening,
contacts pointing downwards
(make sure the angled corner is in
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your subscription is
stored. If the SIM card has been de-
livered in credit-card size, snap the
smaller segment out and remove
any rough edges.
correct position ). Push gently
r
until it engages
.
s
s
r
• Press grooved area n, then lift
cover in the direction indicated by
the arrow
.
o
o
• Insert battery in the phone side-
s
n
ways , then press downwards
t
until it engages u.
u
t
• Press latch in the direction indica-
L
L
I
I
T
T
H
H
I
I
U
U
MM
II
O
O
NN
ted by the arrow , lift battery at
p
the cutout on the side of the
phone, then tilt upwards and
remove
.
q
• Replace cover and press down-
wards until it engages.
q
Note
p
ION
Always switch off phone before removing
the battery!
LITHIUM
Only 3-volt-SIM cards are supported.
Please contact your service provider if you
have an older card.
Functions without SIM card...............p. 62
9
Getting Started
Charge icon not visible
Charge battery
If the battery is totally discharged no
charge icon is displayed when the
charger is plugged in. It is displayed
after 2 hours at most. In this case
the battery is fully charged after
3-4 hours.
The battery is not fully charged
when delivered. Plug in the charger
cable at the bottom of the phone,
plug in the power supply unit to the
mains power socket and charge for
at least two hours.
Only use the charger provided!
o
n
m
c
6
z
y
b
x
a
w
2
l
jk
9
Display while in service
5
v
tu
i
h
8
g
4
rs
0
q
p
7
Charge level display during opera-
tion (empty-full):
a d g
A beep sounds when the battery is
nearly empty. The charge level of the
battery is displayed correctly only
after uninterrupted charging/dis-
charging. You should not remove
the battery unnecessarily and if pos-
sible not end charging prematurely.
h
Display when charging is
in progress
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible in an ambient temperature
of 5 °C to 40 °C (the charge icon
flashes as a warning when the tem-
perature is 5 °C above/below this
range). The voltage specified on the
power supply unit must not be ex-
ceeded.
Note
The charger heats up when used for long
periods. This is normal and not dangerous.
Operating times.................................p. 60
Quality declaration for the battery..... p. 74
To use the full performance of the
battery, the battery must be fully
charged and discharged at least
five times.
10
n, off Switch on/off
Switch on, off / PIN entry
Standby mode
ry
Hold down On/Off/End key
to switch on or off.
_
g
B
Service provider
17.09.2003
09:15
Enter PIN
New SMS
Menu
The SIM card can be protected with a
4-8 digit PIN.
When the name of the service pro-
vider/logo appears on the display,
ready for use.
Enter the PIN code using
J
the number keys (the dis-
play shows a series of
asterisks, if you make a
mistake press §Clear§).
Note
_
Signal strength ........................p. 61
SIM services (optional)............p. 61
Please enter
your PIN:
* * * *
}
§New SMS§.........................................p. 33
§SOS§.................................................p. 14
Change PIN.......................................p. 13
SIM card problems ............................p. 61
Clear SIM card barring ......................p. 14
Other network....................................p. 52
Deactivate/activate screensaver .......p. 46
Set display contrast...........................p. 45
Set time.............................................p. 49
Clear
OK
ꢄ
§OK§
Press the right soft key to
confirm the input.
Logging on to the net-
work will take a few
seconds.
Note
First time switching on phone, the time and
date must be set.
11
General Instructions
User Guide
The following symbols are used to
explain operation:
Menu Control
ons
Steps for calling a function are
shown in a condensed form in this
user guide, e.g. to display the call list
for missed calls:
Enter numbers or letters.
J
§Menu§KCall recordsKMissed calls
On/Off/End key.
B
This corresponds to:
Call key.
A
_
g
n
Service Provider
Press scroll key at the top/
G
17.09.2003
09:15
at the bottom to scroll up
and down.
New SMS
Menu
Press the left or right soft
ꢅꢄ
key to call a function.
ꢄ
§Menu
Displays a function.
§Menu§
Open menu.
Function depends on the
service provider, special
registration may be
necessary.
L
From standby mode: Press
right soft key.
o
]
Messages
Select
F
Press scroll key at the bottom
to scroll downwards.
Scroll to Call records.
F
12
General Instructions
p
r
Z
Office
Call records
View
Options
Select
ꢄ
F
The last call is displayed.
Scroll to the required
entry.
§Select§
Press.
F
Press right soft key to open the
Call records submenu.
Press scroll key at the bottom
to scroll downwards.
q
Calls missed
s
Carol
Select
View
Options
ꢄ
§Select§
Press.
ꢅ
Press right soft key to open the
§View§
Press.
list of Missed calls.
Press left soft key to display the
phone number with date and
time.
Carol
+441224256178
t
17.09.2003
09:15
Call
OK
13
Security
The phone and SIM card are protect-
§Select§
Press.
ed against misuse by several security
codes.
J
Enter PIN.
Confirm input.
§OK§
Keep these confidential numbers in a
safe place where you can access them
again if required.
§Change§ Press.
§OK§
Confirm.
PIN
Protects your SIM card (per-
sonal identification number).
Change PIN
You can change the PIN to any
4-8 digit number you may find
easier to remember.
PIN2
This is needed to set the charge
detail display and to access
additional functions on special
SIM cards.
L
J
Enter old PIN.
Press.
PUK
PUK2
Key code. Used to unlock SIM
cards after the wrong PIN has
been entered.
§OK§
L
§OK§ Enter new PIN.
§OK§ Repeat new PIN.
J
J
,
Phone
code
Protects some functions of your
phone. Must be defined at the
first security setting.
,
Change PIN 2
L
§Menu§KSetupKSecurityKCodes
(displayed only if PIN 2 is available).
Kthen select function
Proceed as with Change PIN.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not per-
mit deactivation of the control.
14
Security
Change phonecode
Prevent accidental
code (4 - 8 digits) when calling a
phone code protected function
(e.g. Direct call, p. 20) for the first
time. It is then valid for all protected
functions.
activation
Even if PIN use is deactivated (p. 13)
confirmation is required to switch on
the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
If it is entered incorrectly three times
the phone is locked. Contact the
Siemens Service (p. 66).
Hold down.
B
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Please confirm switch on
OK
Cancel
Press to switch on the
phone.
Note
Press (or no further input)
to stop switch-on proce-
dure. The phone does not
switch on.
Direct call ..........................................p. 20
Screensaver......................................p. 46
Key lock ............................................ p. 60
Further security settings....................p. 50
Emergency number (SOS)
By pressing the soft key §SOS§, you
can make an emergency call on any
network without a SIM card and
without entering a PIN (not available
in all countries).
This must only be used in real emer-
gencies!
15
My phone
e
Your phone offers a number of func-
tions so that you can adapt it to meet
your personal requirements.
Where do I get what?
You can order additional ringtones,
logos and screensavers on the Inter-
net and receive them via SMS:
Ring tones
Assign individual ringtones to caller
groups (page 41, page 43).
Animation style, Screensaver,
Logo
Siemens City Portal
Adjust your phone according to your
own wishes in the following ways to
Further services for your mobile
phone such as a Photo Logo Com-
poser to create personal pictures for
your Phonebook (p. 25) can be
found on:
To switch on
Select a picture style and a greeting
The Siemens City Portal also offers
a list of countries in which these
services are available.
Screensaver
You can set an individual picture as
screensaver (p. 46).
CLIPit™ Covers
(Provider) Logo
Select an individual picture to re-
place the network provider’s logo/
name (p. 45).
Select different colours for the top
and bottom covers from the Siemens
City Portal. Or use a personal photo
to make your phone unique:
16
Making a phone call
a
all
Dialling with number
keys
Redial previous numbers
To redial the phone number last
called:
The phone must be switched on
(standby mode).
Press the Call key twice.
A
Enter the number (always
J
To redial other numbers that were
dialled previously:
with prefix, if necessary
with the international
dialling code).
Press the Call key once.
A
§Clear§ A short press clears
the last digit, a long press
clears the entire number.
Pick out the required
phone number from the
list, then press ...
G
Press the Call key. The
A
phone number displayed
... to dial.
A
is dialled.
Note
End call
ꢃStore number .........................p. 22
§Options§ Call lists.............................p. 28
§Hold§ Swap/conference....................p. 18
y menu§ Call menu ..........................p. 20
§Divert§ Divert set ..............................p. 48
International dialling codes................p. 59
Key lock.............................................p. 60
Phone number memo........................p. 60
Microphone off ..................................p. 20
Press the End key briefly.
B
The call is ended. Press
this key even if the person
on the other end of the
line has hung up first.
Set volume
You can activate adjust-
ment of the handset vol-
E
ume with the scroll key (at
the top), but only during a
call.
Phone number transmission off/on
(Hide ID)............................................p. 46
Control codes (DTMF).......................p. 58
G
Set volume.
If a car kit is used, its volume setting
will not affect the usual setting on
the phone.
17
Making a phone call
When a number is busy
Accept call
If the called number is busy or can-
not be reached because of network
problems several options are avail-
able (depending on the service pro-
vider). An incoming call or any other
use of the phone interrupts these
functions.
i
+498912345
Reply
Reject
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
Either
Auto redial previous numbers
§Auto dial§ Press. The number is auto-
matically dialled for up to
15 minutes at increasing
intervals. End with:
§Reply§
Press.
Or
Press.
A
BEnd key.
If the phone number has been
Or
transmitted by the network, it is dis-
played. If the number and the name
are stored in the Phonebook, the
corresponding name is displayed
instead. If set, a picture can be dis-
played instead of the bell icon
(p. 25).
Call back
L
§Call back§ Press. Your phone rings
when the busy number is
free. Press the Call key to
dial the number.
Or
Note
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid possible damage to your
hearing by a loud ringtone.
Reminder
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after
15 minutes.
18
Making a phone call
Reject call
Call waiting/Swap
L
§Reject§
Press.
You may need to register for this
function with the service provider
and set your phone accordingly
(p. 46).
Or
Press briefly.
B
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call. You have the following
options:
Note
ꢂ Missed calls............................... p. 28
Held call
You can call another number during
a call.
Accept the waiting call
§Swap§
Accept the waiting call
and place the current call
on hold. To swap
y menu§ Open call menu.
Hold
The current call is put on
hold.
between the two calls,
proceed as above.
_
g
End the current call:
Call held
Press. The following
B
query is displayed:
"Return to the call on
hold?"
Back
§Yes§
Or
Return to the held call.
Now dial the new phone number
(also from Phonebook: ).
F
When the new connection is estab-
lished:
§No§
The held call is ended.
y menu§ Open call menu
Swap
Swap back and forth
between both calls.
Note
Additional costs will be incurred for the 2nd
phone connection.
19
Making a phone call
Reject waiting call
L
Conference
§Reject§
Reject the waiting call.
The caller hears the busy
tone.
Call up to 5 parties one by one and
link them together in a phone con-
ference. Some of the functions de-
scribed may not be supported by
your service provider or may have
to be enabled specially.
Or
§Divert§
call will be diverted to the
mailbox for example
(setting, p. 48).
You have established a connection:
y menu§ Open menu and select
Hold. The current call is
put on hold. Now dial a
new number. When the
new connection is
End current call
B
End the current call.
Accept the new call.
established ...
§Reply§
y menu§ ... open menu and select
Conference. The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
End
All calls in the conference
B
are ended simultaneously
when the End key is
pressed.
Note
Additional costs will be incurred for every
additional phone connection.
20
Making a phone call
Call menu
Direct call
The following functions are only
available during a call:
The phone can be locked, so it's only
possible to dial a defined number,
for e.g. your babysitter and your
child at school.
y menu§ Open menu.
Hold
(p. 18)
Switch on
Micro-
phone on
Switch microphone on/off. If
switched off, the person on
the other end of the line can-
not hear you (muting).
§Menu§KSetupKSecurity
KDirect call
§Select§
Press.
Alternatively: *Hold
down.
Enter phone code:
J
Volume
Adjust handset volume.
(p. 19)
When first prompted you define and
enter the phone code (4 - 8 digits).
Please do not forget this code!
Confe-
rence
§OK§
Confirm input.
Time/cost
While the connection con-
(if set, p. 29) the charge
details are displayed.
Q/ J Select phone number
from the Phonebook
(p. 22) or enter a new
one.
Send
DTMF
(p. 58)
Swap
(p. 18)
§OK§
Confirm On.
Call
The original call is joined to
the second one. For you,
both calls are now ended.
transfer
L
Main menu
Access to the main menu.
Call status
List all held and active calls
(e.g. participants in a
conference).
21
Making a phone call
Use
_
g
Service provider
17.09.2003
09:15
Carol
Hold down the right soft
key to dial (e.g. Carol's
phone number).
ꢄ
Switch off
#
J
Hold down.
Enter phone code.
Confirm input.
§OK§
§Change§ Press.
§OK§
Confirm Off.
Note
Change phone code..........................p. 14
22
Phonebook
ook Enter frequently used phone num-
bers in the Phonebook with a special
name. To dial them, simply highlight
the name. If a phone number is
stored with a name, it appears on
the display when you are called.
Entries that belong together can
be combined to form a group.
Group:
Default: No group
§Change§ Entries can be organised
by groups (p. 26) for
example:
Family, Friends, VIP, Others
Location:
<New entry>
Open Phonebook in
(
§Change§ Select a storage location:
SIM, Mobile or Protected SIM
(p. 24).
standby mode).
F
Record no.:
<New entry>
Each entry is automatically assigned
a number under which it can also be
selected (p. 23).
Select
§Change§ Press to change the entry
§Select§
G
J
Press.
number.
§Save§
Press to store the new
entry.
Activate input fields.
Complete the following
entries. The maximum
number of characters
available is shown at the
top of the display.
Note
<Groups> .........................................p. 26
<Own number>................................p. 60
§+List§ International dialling code.......p. 59
Service numbers ...............................p. 61
Store control codes ...........................p. 58
Number:
Always enter phone number with an
area dialling code.
Name:
Enter (Text entry, p. 23).
23
Call/search for an entry
Phonebook
Text entry
Press number key repeatedly until the
required letter is displayed. The cursor
advances after a short delay.
Open Phonebook.
F
/
Select a name with the
first letter and/or scroll.
J
G
Press once for a, twice for b
2
etc. The first letter of a name is
automatically written in
UPPER CASE.
Dial number.
A
Hold down: Writes the digit.
Call with record no.
A record number is automatically
assigned to every new entry in the
Phonebook.
Ä, ä /1-9
Umlauts and numbers are dis-
played after the relevant let-
ters.
Press briefly to delete the let-
ter before the cursor.
Hold down to delete the whole
name.
§Clear§
Enter record number
J
(in standby mode).
Move the cursor (forward/
back).
#
Press.
G
#
Press briefly: Switch be-
tween: abc, Abc, ABC, T9abc,
T9Abc, T9ABC, 123. Status
indicator in the top line of the
display.
are displayed.
characters (p. 59).
Hold down: Open input menu
(p. 59).
Dial number.
A
Edit entry
Select entry in the Phone-
G
book.
*
§Options§ Press and select Edit.
Select required input
G
field.
Press once/repeatedly:
. , ? ! ’ “ 0 - ( ) @ / : _ + ~ &
0
Make your changes.
Hold down: Write 0
J
1
Space. Press twice = skip line.
§Save§
Press.
24
Phonebook
Phonebook menu
Location:
An entry can be moved to different
storage locations in the Phonebook
(change entry, p. 23).
§Options§
Open menu.
View
Edit
Display entry.
SIM (standard) ¢
Open entry for editing.
Entries that are stored in the Phone-
book on the SIM card can also be
used on a different GSM phone.
New
entry
Create a new Phonebook
entry.
Delete
Delete entry from the Phone-
book.
Mobile v
Phonebook entries are stored in the
memory of the mobile phone when
the memory of the SIM card is full.
Delete all
Select storage location. Delete
all entries after confirmation.
Send
as entry: Send Phonebook
Protected SIM ¡
L
SMS...
entry as vCard to recipient.
tected locations on a special SIM
card. A PIN 2 is needed for editing
(p. 13).
an SMS message.
Picture
Assign an individual picture to
the phone number (p. 25).
Capacity
Display the maximum memory
and the available capacity for
SIM, Protected SIM, phone
memory and pictures.
Symbols in the opened entry
¢,¡,v
Storage location (p. 24)
Picture (p. 25)
›
Å,Ã,Æ,Ç Groups (p. 26)
25
Phonebook
Delete/change picture
If a picture is assigned to a phone
number, it can be deleted or
replaced.
Assign picture
Assign an individual picture to
phone numbers. This picture will ap-
pear in the display when there is a
call from this number.
Select entry with picture
›
G
in the Phonebook.
Open Phonebook.
§Options§ Press.
F
G
§Select§
§Delete§
Select Picture.
Select entry.
The assignment is cleared
after confirmation.
§Options§ Open menu.
Or
§Select§
Select Picture. The picture
list is displayed.
§Select§
The current picture is
displayed.
Note
Select a picture.
G
A picture can be assigned to several phone
numbers.
Add pictures ......................................p. 40
Siemens City Portal...........................p. 15
§Show§
§Select§
The picture is displayed.
The picture is assigned to
the phone number. It ap-
pears with a ›symbol in
the Phonebook.
26
Phonebook
Groups menu
Groups
If there are many Phonebook entries
it is best to assign them to a group,
e.g.: Family, Friends, VIP, Others
Open menu.
View
members
Display all entries assigned
to the group.
A special ringtone can sound (p. 44)
and a symbol will be displayed if the
phone number of a call is registered
in a group.
Rename
group
Change the current name of
the group.
SMS to
group
Send an SMS to all mem-
bers of a group (p. 27).
Select a group
Change group assignment
You can assign a Phonebook entry to
a group when you enter it (p. 22).
§Menu§KPhonebookK<Groups>
Select a group
G
(the number of the en-
To change the group assignment or
to assign to a group later:
tries is listed behind the
group name).
When the Phonebook is open:
Ã
Select entry.
G
Friends (9)
§View§
§Edit§
Press.
Press.
View
Options
§View§
Press. All entries of the
selected group are dis-
played.
Scroll to Group.
G
§Change§ Press and select a new
The following functions are applied
to the group or all entries of a group:
group.
§Save§
Confirm assignment.
27
Phonebook
Group entry menu
SMS to group
A memo (SMS) can be sent as a
"circular" to all members of a group.
Each SMS is charged separately!
§Options§
Open menu.
View
Display entry.
Edit
Open entry for editing.
Enter new member.
Select a group
G
(the number of the
New entry
Remove
entries is listed behind the
group name).
Remove entry only from the
group. It is still available in
the Phonebook.
Ã
Remove all
Remove all entries from the
group.
Friends (9)
View
Options
Send SMS...
as entry: Send Phonebook
entry to recipient.
as text: Send entry as text
§Options§ Press and select SMS to
group.
Picture
Assign an individual picture
to the phone number
(p. 25).
§Select§
Press. The editor is
opened.
Compose message.
J
Press. The Group is dis-
played.
A
§OK§
Press. The first recipient is
displayed.
Press. The SMS is sent to
the first recipient.
A
A
Press to start the next
send operation.
Each send operation must be con-
firmed. Individual recipients may be
skipped.
28
Call records
ords Your phone stores the phone num-
bers of calls for convenient redial-
ling.
Calls received
The last ten accepted calls are listed.
Requirement: The network supports
the "Caller Identity" feature.
L
§Menu§KCall records
§Select§
Press.
Calls dialled
Access to the last ten numbers you
dialled.
Choose call list.
Press.
G
Fast access in standby
§Select§
A
mode.
Select phone number.
Dial phone number.
Erase records
G
The contents of all call lists are
deleted.
A
Call list menu
The call list menu can be called up if
an entry is highlighted.
Or
§View§
Display information on
the phone number.
§Options§ Open call list menu.
The following call lists are available:
View
View entry.
Missed calls
L
Correct no.
Load number into display
and correct it there if
necessary.
The phone numbers of the last ten
calls that you have received but not
answered are stored for call back
purposes.
Save no. to
d
Store entry in the
Phonebook.
Icon in standby mode for
ꢂ
missed call. When you
press the left soft key, the
phone number is dis-
played.
Delete
Delete entry after
confirmation.
Delete all
Delete all entries of the call
list after confirmation.
Requirement: The network supports
the "Caller Identity" feature.
29
Duration/ charges
/
You can display the charge details
Charge settings
and the duration of calls as you
speak as well as setting a unit limit
for outgoing calls.
§Menu§KCall records
KDuration/ charges
KCharge settings
§Menu§KCall records
Currency
L
KDuration/ charges
(PIN 2 query)
After you have made the charge de-
tail settings, you can display the call
duration/charges for the various call
types or you can display the credit
balance.
Enter the currency in which the
charge details are to be shown.
Personal rate
(PIN 2 query)
L
Select a function:
Last call
Enter the charges per unit/period.
A/c limit
(PIN 2 query)
L
All outgoing calls
All incoming calls
Remaining units
Charge settings
Special SIM cards allow you or the
service provider to define a credit or
period after which the phone is
barred for outgoing calls.
§Select§
Display the data.
§Select§
Press, enter PIN 2.
When displayed, you can:
A/c limit Activate.
§Reset§
§OK§
Reset display.
End display.
J
§OK§
Enter the number of the
units and ...
confirm.
Then confirm the credit or reset the
counter. The display of the credit
balance of prepaid cards may vary
depending on the service provider.
Automatic Display
Call duration and charges of the last
call are automatically displayed after
each call.
30
Voice message/Mailbox
Most service providers offer you an
external answering service. In this
mailbox, a caller may leave a voice
message for you
§Menu§KSetupKDivert
Ke.g. UnansweredKSet
e/
Dial the number of the
mailbox.
J
• if your phone is switched off or
not ready to receive,
§OK§
Registration at the net-
after a few seconds.
For further information on call
divert, see p. 48.
• if you are making a phone call
(and if Call waiting is not active,
p. 46).
L
Play back messages
If the voice mail service is not part of
your service provider's user package,
you will need to register for it and
the settings must be made manually.
The procedure described below may
vary slightly depending on the serv-
ice provider.
A new voice mail can be announced
as follows:
\
Icon including beep.
Or
A text message announc-
es a new voice mail.
]
L
Settings
Or
Your service provider supplies you
with two phone numbers:
You receive a call with an automatic
announcement.
Mailbox number
Call your mailbox and play the mes-
sage(s) back.
You call this phone number to listen
to the voice mails left for you. To set
it up:
Hold down (if necessary
enter mailbox number
once only).
1
§Menu§KMessagesKVoice message
Select phone number from Phone-
book or dial/change it and confirm
with §OK§.
Confirm with §OK§ or §Mail-
box§ depending on your
service provider.
Call divert
Calls are diverted to this phone
number. To set it up:
Outside your home network, you
may need to dial a different mailbox
number and enter a password to ac-
cess your mailbox.
31
Messages
es You may transmit and receive very
Pictures and sounds in SMS
Pictures or sounds can be part of
messages you receive.
long messages (up to 760 charac-
ters) on your phone, which are auto-
matically composed from several
"normal" SMS messages (note the
accruing charges).
Pictures are shown in the message,
sounds are indicated as notes. If a
note is reached when scrolling
through the message, the corres-
ponding sound is played (to send
pictures and sounds see p. 36).
Depending on the service provider,
e-mails and faxes can also be sent or
e-mails can be received via SMS
(change setting if necessary, p. 37).
Note
T Message store full....................p. 60
Read messages
Use §highlighted§ phone no. .............p. 60
Display indicates a new
]
message.
Reply menu
_
g
§Reply§
Open the reply menu.
Service provider
17.09.2003
09:15
Write message
Edit
Create a new reply
text.
]
Menu
Edit message received
or assign a new text
to it.
Press the left soft key to read the
message.
Answer is YES
Answer is NO
Add YES to the
message.
Date/time
No./sender
Message
17.09.2003
017198987676§
Do we meet tomorrow?
23:45
Add NO to the
message.
Reply Options
Call back
Delay
Thanks
Append a standard
text to the message as
a reply.
Scroll through the mess-
age line by line.
G
§Reply§
below.
When the message has been edited
in the editor, it can be stored or sent
with §Options§.
§Options§ Inbox/outbox menu
(p. 32).
32
Messages
Inbox/outbox menu
Different functions are available de-
pending on the context:
Inbox/outbox
§Menu§KMessages
KInbox / or Outbox /
The list of saved messages is shown.
§Options§ Open menu.
View
Read entry.
ƒ Barbara
… Carol
Reply
(Inbox only)
Directly answer incoming
SMS messages.
… 023598765432
View
Options
Delete
Delete selected message.
Delete all
Delete all entries after
confirmation.
§Options§ See below.
Send
Edit
Dial number or select from
the Phonebook, then send.
Symbol Inbox /
Outbox /
Not sent
Sent
Read
ƒ
Open editor for editing.
Unread
…
Picture &
sound
(p. 36)
List pictures and sounds in-
cluded in the message.
Capacity
Display maximum and
available capacity.
Status
(Outbox list only) Request
delivery confirmation for
messages sent.
report
L
Mark as
Mark the message as
unread.
unread
(Inbox only)
Save no. to
d
Copy a selected phone
number to the Phonebook.
Send with...
Change SMS profile before
sending (p. 37).
33
Messages
Note
Insert pictures & sounds into text ......p. 36
If Message type, Validity period, Service
centre are requested ....................... p. 37
T9 information ...................................p. 34
Enter special characters....................p. 59
SMS status report..............................p. 62
§Menu§KMessagesKNew SMS
Text entry with T9, p. 34
J
allows you to create long
text messages quickly
using just a few key
entries.
§Clear§ Press briefly to de-
lete letter by letter, hold
down to delete the entire
word.
Text menu
§Options§ Open the text menu.
A
Press.
Send
Dial the number or select
/
Dial number or pick out
from the Phonebook.
from Phonebook, then send.
ꢃ
J
Save
Save SMS in the outbox list.
§OK§
Confirm. The message is
sent to the service centre
for transmission.
Picture &
sound
Add pictures and sounds to
SMS (p. 36)
Format
Line feed
§OK§
Return to the message.
Small font, Medium font,
Large font
Underline
Left, Right, Center (align)
Mark text (highlight text with
the scroll key)
§Options§ Open menu and select
Save to store the message.
Display in the uppermost line:
™
SMS
We start at 8 a.m.
1
739
Clear text
Insert text
Delete the whole text.
™
Example for T9 active.
Insert predefined text
fragment (p. 34).
abc/Abc/ABC/ Lowercase/uppercase
T9abc/T9Abc/ letters and digits
T9ABC/123
Insert from
d
Open Phonebook and copy
phone number into the
message.
SMS
1
Display title.
Number of the required
SMS messages.
739
Number of characters still
available.
34
§Select§
Confirm. The text frag-
ment is inserted in the
message at the cursor
position.
Text input
T9 preferred: Activate/de-
activate T9 input (p. 34).
language in which the mes-
sage is to be composed
(p. 34).
Text entry with T9
T9 deduces the correct word from
the individual key entries by making
comparisons with an extensive dic-
tionary.
Send
with...
Change SMS profile before
sending (p. 37).
Predefined texts
You can create five text fragments
yourself.
Setup
§Menu§KMessagesKText input
Write text fragments
Activate, deactivate T9
T9 preferred
§Menu§KMessagesKPredefined texts
Select.
Select <New entry>.
p
G
Activate T9.
§Change§ Confirm.
Write text fragment.
J
™
on the display
indicates for example
whetherlowercase/upper
case is active.
§Save§
Press.
Use text fragments
Select input language
Select the language in which you
want to compose your message.
Compose message.
J
§Options§ Open the text menu.
Input language
Select.
Select Insert text.
G
G
§Select§
Confirm, the new
language is set.
Select text fragment from
the list.
Languages with T9 sup-
port are marked by the
T9 symbol.
35
Messages
T9 word suggestions
Create a word using T9
If several options are found in the
dictionary for a key sequence
(a word), the most probable is
displayed first. If the word you want
has not been recognised, the next
suggestion from T9 may be correct.
Since the display changes as you
proceed it is best if you finish a word
without looking at the display.
You simply press the keys where the
relevant letter is located once only.
For "hotel", for example:
The word must be §highlighted§.
Then press
Press briefly for T9Abc then
#
The displayed word is
46835
»
replaced with a different
word. If this word is also
incorrect,
Press. A blank ends a
1
word.
press again. Repeat until
the correct word is dis-
played.
Do not use special characters such as
Ä but write the standard character,
e.g. A, T9 will do the rest for you.
»
If the word you want is not in
the dictionary, it may be written
without T9.
Note
0
Full stop. Ends a word when a
blank follows. Acts as a wild-
card character for an apostro-
phe/hyphen in the word:
™
SMS
1
748
At 8 h we are ___
e. g. §provider.s§ = provider’s.
Press scroll key at the bottom
F
to end a word.
Spell
»
Press briefly: Switch be-
#
tween: abc, Abc, T9abc,
T9Abc, T9ABC, 123. Status
indicator in the top line of the
display.
To add a word to the dictionary:
§Spell§
Select.
The last suggestion is deleted and
the word may now be entered with-
out T9 support. Press §Save§ to add it
automatically to the dictionary.
are displayed.
characters (p. 59).
*
Hold down to open the input
menu (p. 59).
36
Messages
Correct a word
SMS to group
Words created using T9:
You can send messages (SMS mess-
ages) as "circulars" to all members of
a group (p. 26).
Move word by word to
G
the left/right until the
required word is high-
lighted.
Insert pictures and sounds in the
message (EMS, p. 58).
Scroll through the T9
»
§Clear§
word suggestions again.
Deletes the character to
the left of the cursor and
displays a new possible
word!
Compose the message.
J
§Options§ Open the text menu at the
end of a word.
Words not created using T9:
Select Picture & sound.
G
Move character by charac-
G
The Pictures & Sound
menu opens:
ter to the left/right.
§Clear§
Deletes the character to
the left of the cursor.
Fix animations u
Fix sounds –
Characters are inserted at
the cursor position.
Own animations u
Own pictures —
Own sounds –
J
Note
Within a "T9 word", individual letters may
not be edited without removing T9 first. In
most cases it is better to rewrite the com-
plete word.
Select range.
G
§Select§
Confirm.
The first entry of the se-
lected range is displayed.
®
T9 Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,818,437,
5,953,541, 5,187,480, 5,945,928 and 6,011,554;
Canadian Pat. No. 1,331,057; United Kingdom
Pat. No. 2238414B; Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No.
51383; Euro.Pat. No. 0 842 463 (96927260.8) DE/
DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional
patents are pending worldwide.
Scroll in the list to the
required entry.
G
§Select§
The picture/animation is
inserted in the message.
Sounds are indicated by a
wildcard.
37
Messages
§Show§ To select from Own
To set a new profile:
pictures/Own animations,
you must open the
preview first.
Select profile.
G
§Options§ Open menu.
Note
Change settings
Playback only occurs on phones that sup-
port this function.
In input mode a wildcard is shown instead
of the sound.
Select and confirm.
Service
centre
Enter or change the phone
numbers of the service centre
as supplied by the service
provider.
Own pictures/Own animations .........p. 40.
Recipient
Enter the standard recipient
for this transmission profile or
select from the Phonebook.
SMS profiles
§Menu§KMessagesKSMS profiles
Message
type
Manual
The message type is request-
ed for each message.
Activate SMS profile
You can change the current profile.
Standard text
Normal SMS message.
Fax
Transmission via SMS.
E-mail
Transmission via SMS.
New
You may need to obtain the
required code number from
your service provider.
Select a profile.
G
§Select§
Press to activate. The cur-
rent profile is selected.
Irrespective of this setting, you may
SMS which profile you want to use
(see text menu §Options§KSend
with..., p. 33).
Set SMS profiles
A maximum of 3 SMS profiles can be
set. They define the transmission
characteristics for an SMS. The pre-
setting depends on the SIM card
inserted.
38
Messages
Topic list
You can add your topics to this per-
sonal list.
Validity
period
Select the period in which the
service centre tries to deliver
the message:
Manual, 1 hour, 3 hours,
6 hours, 12 hours, 1 day,
1 week, Maximum*
* Maximum period that the
service provider permits.
Select <New Topic>.
• Enter a topic with its channel
number and confirm with §OK§.
§Options§ Open list menu.
Status
report
L
You are given confirmation of
the successful or unsuccess-
ful delivery of a sent message.
This service may be subject to
a charge.
If a topic is selected in the list you
can have a look at it, activate, deacti-
vate, edit or delete it.
Note
Direct
reply L
The reply to your message is
handled via your service cen-
tre when Direct Answer is
activated (for information
please contact your service
provider).
To switch to "full page view":
#, then press §View CB§.
Displays:
o,
Topic activated/deactivated.
New messages received on
the topic.
p
…
ƒ
Cell broadcast services
Messages already read.
Some service providers offer infor-
mation services (info channels). If
reception is activated, you receive
messages on the activated topics in
your "Topic list".
§Menu§KMessages
KCell broadcast services
Receive CB
L
You can activate and deactivate the
CB service. If the CB service is activa-
ted, the standby time of the phone
will be reduced.
39
Extras
Setup
Games
You can activate and deactivate the
following functions for the games:
§Menu§KExtrasKGames
KChoose game
Select a game from the list and have
fun!
Sounds
You can switch the sounds for the
games on and off.
Game instructions
You will find special instructions for
each game in the option menu.
Illumination
You can switch off the display illumi-
nation to increase standby time.
§Options§ Provides tips on how to
play the game, shows the
saved scores and allows
you to set the level of
difficulty.
Silent alert
You can switch the silent alert for the
games on and off.
Note
§Start§
Start game.
You will find the games "Stack Attack" and
"Wacko" on your mobile phone.
The English language instruction for
"Stack Attack" can be found at
Key control
1
4
7
3
6
9
2
5
8
function depends
on the game
40
Extras
Animation or picture
Own pictures/Own
animations
Set logos and screensavers as
required in your phone.
§Options§ Open menu.
Show
Show animation or picture.
You can store 2 animations and
2 pictures in the phone.
As screen-
saver
Use current picture as
screensaver.
§Menu§KExtrasKOwn animations
Different lists are offered depending
on the entry selected.
Use as
logo
Use current picture as (pro-
vider) logo (see also p. 45).
or KOwn pictures
Delete
Delete selected picture/
animation.
Select animation/picture.
G
Receive pictures
§Show§
The animation/picture is
displayed.
_
g
Screensaver/Logo
17.09.2003
09:15
See picture menu §Options§.
]
Menu
List menu
If a picture (graphic/screensaver) has
been received via SMS the
appears in the display. By pressing
the left soft key, the picture will be
displayed.
]
symbol
§Options§ Open menu.
Show
Show animation or picture.
Delete
Delete selected picture/
animation.
Note
Pictures in the content of an SMS .....p. 31
Delete all
Attributes
Delete all pictures/
animations.
Display name and size in
kByte.
41
Extras
Ringtone menu
Different functions are available
depending on which entry is
highlighted.
Own sounds
You can play and manage stored
ringtones/melodies.
§Menu§KExtrasKOwn sounds
§Options§ Open menu.
A list of the stored ringtones/melo-
dies is displayed:
Play
Play sound.
%
Ring tone
for...
Assign a ringtone (p. 43).
Ringtones/melodies that have been
received via SMS.
Delete
Delete sound.
Delete all
Attributes
Delete all sounds.
$
Display name, size and re-
cording time.
Ringtones/melodies that you have
stored from the content of a SMS.
You also can send these via SMS/
EMS.
Receive sound
_
g
i
Unmodifiable ringtones stored in the
phone.
17.09.2003
09:15
]
Menu
Playback
If sounds have been received via SMS
the symbol ]appears in the dis-
play. Press the left soft key to play.
Select sound.
G
§Play§
The selected sound is
played continuously.
§Stop§
End playback.
Note
The sound is converted into a device-spe-
cific format only when it is played for the
first time. A short delay may occur.
42
Extras
Calculator
§Menu§KExtrasKCalculator
Enter number
J
(up to 8 digits).
Function "+" or "-".
G
Or
§.§=§+§-§*§/§ Press soft key repeatedly
on the right.
Repeat procedure with
J
other numbers.
#
Result is displayed.
Calculator functions
§.§=§+§-§*§/§ Press soft key repeatedly on
the right:
.
Set decimal point.
Result.
=
Addition.
+
Subtraction.
-
Multiplication.
*
Division.
/
±
%
ꢆ
ꢇ
e
Toggle between "+" and "-".
Convert to percentage.
Save the number displayed.
Retrieve the number saved.
Exponent (maximum of two
digits).
Special keys:
*
Set decimal point.
Add (hold down).
0
43
Ring tones
es You can set the tones that sound in
Volume
You can set the volume for all tones.
specific situations to suit your partic-
ular tastes.
§Menu§KRing tones
Set volume.
G
KSelect a function.
Display for rising
volume.
Ringer setting
On/Off
Activate/deactivate all
ringtones.
§OK§
Confirm.
Note
Beep
Reduce ringer to a short
beep.
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid your hearing possibly being
damaged by a loud ringtone.
Note
k
Display: Beep.
Display: Ringer off.
j
d Call tone
You can assign a ringtone to callers
entered in the Phonebook.
Silent alert
To avoid being disturbed by the
ringer, you can activate the silent
alert instead. The silent alert can also
be activated in addition to the ringer
(e.g. in a noisy environment). This
function is deactivated when the
battery is being charged or the Car
Kit is connected.
§Select§
Press.
Choose ringtone.
Confirm.
G
§Select§
44
Ring tones
Group call tones
You can assign different ringtones to
groups.
More Tones
Call screening
L
Only calls from numbers that are in
the Phonebook or in a predefined
group are signalled audibly or by
silent alert. Other calls are only dis-
played.
Choose:
G
Ç
Family
à Friends
Å
VIP
If you do not accept these calls, they
are diverted to your mailbox
(if set, p. 30).
Æ
Others
§Select§
Press.
Note
l
Choose ringtone.
Confirm.
Display:
when call screening is
activated.
G
§Select§
Key tones
You can set the acoustic key tone:
Other call tone, Alarm
tone, Message tone
Click or Tone or Silent
Minute beep
§Select§
Press.
If you have started the call, you will
hear a beep after each minute as a
reminder of the time elapsed during
the call.
Choose ringtone.
Confirm.
G
§Select§
Set service and alarm tones:
Note
Own sounds......................................p. 41
Groups ..............................................p. 26
For Other call tone, a special ringtone can
depending on your network provider.
On/Off
Activate/deactivate serv-
ice and alarm tones.
You can receive individual ringtones via
SMS (p. 31).
45
Setup
Big letters
You can choose between two font
sizes for the display.
Language
§Menu§KSetupKLanguage
Set the language of the display text.
When "automatic" is set, the lan-
guage of your home service provider
is used. If a language that you do not
understand happens to be set, the
phone can be reset to the language
of your home service provider with
the following input:
Illumination
Can be switched on and off
(switching it off increases the
standby time).
Contrast
You can set the display contrast.
# 0 0 0 0 #
A
*
Press scroll key at the top/
Display
G
at the bottom repeatedly
to set the display contrast.
§Menu§KSetupKDisplay
KSelect a function
Logo (provider logo)
Select a picture.
Own greeting
Your own greeting is displayed in-
stead of a picture when you switch
on the phone.
§Edit§
J
§OK§
Greeting is displayed.
Delete old greeting and
create new greeting.
Confirm change and
switch on.
Animation style
You can select between two pictures
which are shown for example when
entering a PIN.
46
Setup
Screensaver
Call setup
The screensaver shows a picture on
the display as soon as a period that
can be set by you has elapsed. The
call or by pressing any key. You can
also receive and store screensavers
via SMS (S. 40).
§Menu§KSetupKCall setup
KSelect a function
Hide ID
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
L
§Menu§KSetupKScreensaver
KSelect a function.
To suppress this display, you can
activate the "Hide ID" mode for the
next call or for all subsequent calls.
You may need to register separately
with your service provider for these
functions.
Enable
Activate screensaver.
Choose a picture with
§Select§.
Preview
Timeout
Display the screensaver.
Set period after which the
screensaver starts.
Call waiting
L
you can check whether it is set and
you can activate/deactivate it
(p. 18).
Code
protection
Phone code protected ter-
mination of the screen-
saver.
Minute beep
If you have started the call, you will
hear a beep after each minute as a
reminder of the time elapsed during
the call.
47
Setup
§Menu§KSetupKCall setup
Headset
If an original Siemens Headset is
used (p. 73) the profile is automati-
cally activated when the headset is
plugged in.
KSelect a function
Car Kit
Setup for the original Siemens Car
Kit Portable (p. 73):
User-definable settings
Auto answer
(factory default: off)
Calls are accepted automatically
after a few seconds (except where
the ringer is switched off or set to
beep). You should therefore be
wearing the headset.
User-definable settings
Auto answer
(factory default: off)
Calls are accepted automatically
after a few seconds.
Indication on the display.
±
Switch between the
ꢀ
Automatic setting
phone and Car Kit Port-
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
able during a call.
Automatic settings:
• Permanent illumination:
switched on.
Auto answer
If you fail to notice an incoming call there is
a risk that it may be overheard by others.
• Charging the phone battery.
48
Setup
All calls
All calls are diverted.
L
Divert
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
n
Symbol in the top line of
the display in standby
mode.
§Menu§KSetupKDivert
KSelect a function
Status check
You can check the current divert sta-
tus for all conditions.
Set divert
The most common condition for
divert is:
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
Unanswered calls
L
Select Unanswered.
G
p
Condition set.
Not set.
o
(covers the Not reachable,
No reply, Busy conditions)
Display, if status is un-
known (e.g. on a new
SIM card).
ꢈ
§Select§
Set
Press.
Select.
Enter the phone number
to which the caller will
be diverted (if not done
already)
J
or
·
select this phone number
from the Phonebook or
via §Mailbox§.
§OK§
Confirm. After a short
pause, the setting is con-
firmed by the network.
49
Setup
Clear all
L
Clock
All set diversions are cleared.
§Menu§KSetupKClock
KSelect a function.
Time/Date
The clock must be set correctly once
at start-up.
Note
Note that the divert is stored in the network
and not in the phone (when the SIM card is
changed for example).
Check condition or delete it
First select the condition.
§Change§ Press.
§Select§
Press.
First enter the date (day/
month/year), then the
time.
J
Check status Select
or
Delete
Select.
§OK§
Confirm.
Reactivate divert
Note
The last divert has been stored. Proceed as
with "Set divert". The stored phone number
is displayed. Confirm number.
If the battery is removed for more than
about 30 seconds, the clock must be reset.
Edit phone number
Proceed as with "Set divert". When the
stored number is displayed:
Format time
24 hours or am/pm
§Delete§
Press. The phone number is
deleted.
Format date
DD.MM.YYYY or MM/DD/YYYY
Enter new number and confirm.
Setting of the date format to:
DD:
Day (2-digit)
Month (2-digit)
Year (4-digit)
MM:
YYYY:
50
Setup
§Menu§KSetupKClock
Last 10 only
(Phone code protected)
KSelect a function.
Buddhist year
Switch to the Buddhist calendar (not
available in all models).
Calls are limited to the call list of "di-
alled numbers" (p. 28). This list can
be filled with phone numbers specif-
ically for this purpose:
First delete the call list, then create
"new entries" by dialling phone num-
bers and cancelling before the con-
nection is established.
Show clock
The time display in standby mode
can be switched on and off.
This SIM only
(Phone code protected)
Security
L
§Menu§KSetupKSecurity
KSelect a function.
Your phone is prevented from being
used with a different SIM card.
The phone and SIM card are protect-
ed against misuse by several security
codes.
Barrings
L
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4 digit pass-
word which your service provider
will give you. You may need to be
registered separately for each
barring.
Codes
PIN control, Change PIN, Change PIN 2,
ChangePhonecode, see p. 13.
Direct call
All outgoing calls
All outgoing calls except emergency
number 112 and 999 are barred.
Only one phone number can be
dialled. Hold down right soft key
(p. 20).
Outgoing international
Only national calls can be made.
Only ‚
(PIN 2 protected)
The dialling options are restricted to
SIM protected numbers in the
Phonebook. If only area codes are
entered, the relevant phone num-
bers can be added to these manually
before dialling.
51
Setup
§Menu§KSetupKSecurityKBarrings
Outgo internat. x home barred
International calls are not permitted.
However you can make calls to your
home country when abroad.
Alternatively enter in standby mode:
KSelect a function.
# 0 6 #
*
Master reset
The phone is reset to the default
values (factory setting) (does not
apply to SIM card and network ^kt-
settings).
All incoming calls
The phone is barred for all incoming
calls (the forwarding of all calls to
the mailbox offers a similar effect).
Alternative input in standby mode:
# 9 9 9 9 #
A
*
When roaming
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
Network
§Menu§KSetupKNetwork
KSelect a function.
Line
L
Status check
The following information can be
displayed after a status check:
This function is only displayed if it is
supported by the service provider.
Two independent phone numbers
must be registered on the phone.
p
Barring set.
o
Barring not set.
Select
Status unknown
(e.g. new SIM card).
ꢈ
Clear all
Select the currently used phone
number.
Display the current phone
number.
ꢉ
Note
All barrings are cleared. A password
which the service provider will give
you is necessary for this function.
Settings for phone numbers ..............p. 62
Phone identity
Lock line
(Phone code protected)
You may limit usage to one phone
number.
§Menu§KSetupKSecurity
KSelect a function.
The phone ID (IMEI) is displayed. This
information may be useful for cus-
tomer service.
52
Setup
§Menu§KSetupKNetwork
Preferred network
The service providers you prefer
when you leave your home network
can be entered here (e.g. if there are
several networks that differ in price).
KSelect a function.
Network info
The list of GSM networks currently
available is displayed.
Note
Indicates forbidden serv-
²
If the field strength of the preferred network
is not strong enough when you switch the
phone on, the mobile phone may register
with a different network. This can change
when the telephone is next switched on or if
you manually select another network.
ice providers (depending
on SIM card).
Auto network
Activate/deactivate, see also "Choose
network" above. If "Automatic net-
work" is activated, the next network
is dialled in the order of your "pre-
ferred networks". Otherwise a differ-
ent network can be selected manual-
ly from the list of the available GSM
networks.
Your service provider is displayed:
§List§
Display list of preferred
networks.
Create new entry:
• Select empty line, press §Entry§,
then select another entry from the
list of service providers and con-
firm.
Choose network
The network search is restarted. This
is useful if you are not on your home
network or want to register on a dif-
ferent network. The network info list
is rebuilt when Auto network is set.
Change/delete entry:
• Select entry, press §Change§, then
select a different entry from the
list of service providers and con-
firm it or press §Delete§.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
53
Profiles
If a profile is used, several settings
Change setting
are made with one function.
Edit a default profile or create a new
personal profile:
• Four profiles are standard with de-
fault settings, they can be
changed however:
Select profile.
G
Normal environment
Quiet environment
Noisy environment
Headset
§Options§ Open menu.
Change settings Select.
displayed:
• You can set two personal profiles
Ringer setting ....................................p. 43
Silent alert .........................................p. 43
Volume..............................................p. 43
Call screening....................................p. 44
Key tones ..........................................p. 44
Information tones...............................p. 44
Illumination........................................p. 45
Big letters ..........................................p. 45
When you have finished setting a
function, you return to the profile
menu where you can change a fur-
ther setting.
• The special profile Aircraft mode is
fixed and cannot be changed
(p. 54).
If the phone is used by several peo-
ple, they can each activate their own
settings by selecting their individual
profile.
§Menu§KProfiles
Activate
Select default profile or
G
personal profile.
§Select§
Activate the profile.
½
Normal environment
Options
Select
½ Active profile.
54
Profiles
Profile menu
Aircraft mode
All alarms are deactivated. It is not
possible to modify this profile. When
you select this profile, the phone is
switched off after a prompt.
§Options§ Open menu.
Activate
Activate profile.
Change settings
Change profile
settings.
Activate
Copy from
Copy settings from
another profile.
Scroll to Aircraft mode.
G
§Select§
Activate the profile.
Headset
If an original Siemens headset is
used (p. 73), the profile is activated
automatically as soon as the headset
is plugged in (p. 47).
A security prompt must be
confirmed.
The phone switches itself
off automatically.
Normal operation
The next time you switch on the
phone and return to normal opera-
tion the default profile Normal envi.
will be activated.
55
Alarm clock
ock At the set time you will hear a beep,
even if the phone is switched off.
§Menu§KAlarm clock
Press several times. The
E
cursor changes from the
hour input field to min-
utes and then to am/pm if
the 12 hour time format
has been set. The current
time is shown at the top
of the display.
Enter both the hour and
J
minutes.
§Change§ Only change between am/
pm if the 12 hour time
format has been set.
§OK§
Confirm settings.
11:56:27
z 07:30
On/off
OK
§On/off§
Activate/deactivate the
alarm.
Note
y
Alarm clock switched on.
Alarm clock active (display in
standby mode).
y
z
Alarm clock switched off.
56
Fast access key
ess You can program an important
phone number or a function on the
left soft key. You can program an im-
portant phone number on the
Left soft key
A function/number can be pro-
grammed on the left soft key for
fast access.
number keys 2 to 9 (speed dialling
numbers). The phone number can
then be dialled or the function can
be started at the touch of a button.
Change
_
g
Note
Service provider
The left soft key may already have been
preset by the service provider (e.g. access
to "} SIM-services "). It may not be possi-
ble to modify this key assignment.
17.09.2003
09:15
Games
Menu
The left soft key may sometimes be re-
placed automatically by ]/\to access
§Games§
Press briefly.
the list.
Available key assignments:
Extras................................................p. 39
Alarm clock .......................................p. 55
SMS ..................................................p. 33
Inbox (SMS)......................................p. 32
Outbox (SMS) ...................................p. 32
Screensaver......................................p. 46
SMS) to the left soft key.
name (e.g. "Carol") from the
Phonebook for assignment to the
left soft key.
§Select§
Confirm setting.
Apply
The setting "Carol" is used here only
as an example.
§Carol§
Hold down.
57
Fast access key
Apply
In standby mode e.g.:
Speed dialling keys
Number keys 2 to 9 can be used as
speed dialling numbers for fast
access. The number key 1 is reserved
for the mailbox number (p. 30).
Press.
3
The assignment of the number key 3
is displayed above the soft key (on
the right).
Set
Hold down.
In standby mode:
ꢄ
Press number key (2 - 9).
Or simply
J
Hold down.
3
Select Phone number.
G
§Select§
G
§Select§
Press.
Pick out a name for as-
signment to the key from
the Phonebook.
Confirm setting.
Change
§Carol§
Press briefly (if set with a
name (e.g. "Carol") from
the Phonebook).
§Change§ Press.
Pick out a new name for
assignment to the key
from the Phonebook.
G
§Select§
Confirm setting.
58
Notes A-Z
Z
Control codes (DTMF)
EMS
(Enhanced Messaging Service)
Send control code
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes). The
sounds can also be heard when the
microphone is switched off.
Besides (formatted) texts, you can
also send
• pictures (bitmaps),
• sounds,
• animations (sequence of
4 pictures)
y menu§ Open call menu.
using the EMS.
Send DTMF tones
The segments specified above can
be together or transmitted individu-
ally in an SMS. With EMS, pictures
and sounds can also be sent (e.g. as
screensavers and ringtones). This
can cause messages that exceed the
length of a single SMS. In this case a
single message is made up of a
number of concatenated SMS
messages.
Select.
Use the Phonebook
Store phone numbers and control
codes ( DTMF tones) in the Phone-
book like a normal entry.
Enter phone number.
J
Press until a "+" appears
on the display (pause for
connection setup).
0
Enter DTMF signals
J
(digits).
If necessary enter further
0
pauses of three seconds
each to ensure correct
processing at the destina-
tion.
Enter a name.
J
§Save§
Press.
You can also store the DTMF tones
(digits) without a phone number and
send them during a call.
59
Notes A-Z
Enter special characters
Input menu
*
Press briefly. The character
map is displayed:
During text input:
*
Hold down. The input
menu is displayed:
Format
1)
"
¿
’
¡
_
(
;
)
!
/
?
*
,
.
+
-
:
$
¤
{
¥
}
£
~
Input language
Mark text
€
&
=
Σ
#
>
Φ
\
@ [
]
%
Λ
<
Π
l
^
§
Γ
∆
Θ
Ξ
Ψ
Ω
International dialling codes
Many international dialling codes
are stored in your phone.
1) Line skip
In standby mode (
sary when dialling from the Phone-
book):
is not neces-
0
Navigate up/down.
G
Or
Hold down until a "+" is dis-
0
ꢅ
Navigate left.
played. This replaces the
first two digits of the in-
ternational dialling code.
§Select§
Select character.
Extending numbers in the
Phonebook
When entering a phone number in
the Phonebook, digits can be re-
placed by a question mark "?":
§+List§
Press.
Select the required country. The in-
ternational dialling code is dis-
played. Now add the national
number (in many countries without
the first digit) and press the Call key.
#
Hold down.
These wildcards must be completed
for the call.
Select the phone number in the
Phonebook to call:
A
Press.
Replace "?" with digits.
J
Press to dial phone
number.
A
60
Notes A-Z
If the phone is exposed to heat the
Key lock
standby time is considerably re-
duced. Avoid exposing the phone
to direct sunlight or placing it on a
radiator.
The key lock prevents the phone
from being used accidentally. How-
ever you can still be called and you
can still make an emergency call.
The keypad can be locked and un-
locked in standby mode as follows.
Outside the home network
If you are outside your "home net-
work" your phone automatically di-
als a different GSM network (p. 52).
# Hold down.
Own numbers
TMessage store full
You can enter your "own numbers"
in the Phonebook (e.g. fax) for infor-
mation. These numbers can be
changed or deleted and also sent as
an SMS.
The SIM memory is full when the
message symbol flashes. No more
SMS messages can be received.
Delete or save messages (p. 32).
Operating times
Phone number memo
A fully charged battery provides
60 to 300 hours of standby time or
90 to 360 minutes of talk time. The
standby times/talk times are average
values and depend on the operating
conditions (see table):
If you enter a number with the key-
pad during a call, the person on the
other end of the line can hear the
numbers being entered. It can be
stored or dialled after the current call
has ended.
Operation
carried out
Time Decrease in the
(min) standby time by
Phone number in SMS
Numbers §highlighted§ in the message
can be dialled (press A) or they can
be stored in the Phonebook (p. 22).
Calling
1
1
30 to 60 minutes
30 minutes
Display back
light *
Network
search
1
5 to 10 minutes
* key input, games etc.
61
Notes A-Z
Quick menu selection
SIM card problems
All menu functions are numbered in-
ternally. By entering these numbers
one after the other the function may
be started at once.
You have inserted your SIM card, but
the following message appears:
Please insert SIM card
Please ensure that the card is
correctly inserted and the contacts
are clean; if necessary, clean them
with a dry cloth. If the card is dam-
provider.
For example, to compose a new
SMS:
§Menu§
Press.
for Messages
for New SMS
1
1
See also "Questions & Answers",
p. 63.
If your service provider offers addi-
tional functions (SIM services) in the
menu system, the numerical order
may change.
SIM services (optional)
L
Your service provider may offer
special applications such as mobile
banking, stock market etc. via the
SIM card.
Service numbers
If you have such a SIM card the SIM
services will appear at the top of the
main menu or directly above the left
soft key.
Numbers that you are offered by
your service provider may be stored
in the Phonebook. You can call local
or nationwide information services
or use services of the service
provider.
Symbol of the SIM
}
services.
Signal strength
If there is more than one application
they are displayed in the "SIM servic-
es" menu.
_
Strong signal.
^
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
§Menu§KExtrasKSIM serv
With the SIM services menu, your
phone is ready for the future and will
support additions to your service
provider's user package. For further
information, please contact your
service provider.
62
Notes A-Z
SMS status report
Without SIM card
If the phone was unable to send the
message to the service centre a retry
option is available. If this attempt
also fails, contact your service
provider.
If you switch on the phone without
SIM card, you can use a few func-
tions of the phone.
§Menu§
Press right soft key. The
functions are displayed.
The message sent! text only indicates
that the message has been transmit-
ted to the service centre which now
tries to deliver the message within a
certain period.
§SOS§
Emergency number, SOS.
See also "Validity", p. 37.
Software version
To display the software version of
your phone in standby mode enter:
# 0 6 #, then press §Info§.
*
Two phone numbers
L
Special settings can be made for
each phone number (e.g. ringtone,
call divert etc.). Switch to the re-
quired number first.
To switch the phone number/line in
standby mode:
Press.
0
§Line 1§
Press.
et up.
63
Questions&Answers
ns&A
If you have any questions about using your phone, visit us at
www.my-siemens.com/customercare anytime. In addition we have listed some frequent-
ly asked questions and answers below.
Question
Possible causes
Possible solution
Phone cannot On/Off key not pressed long
be switched on. enough.
Press On/Off key for at least two seconds.
Flat battery.
Charge battery. Check charging indicator in the
display.
Battery contacts dirty.
Clean contacts.
See also below under:
"Charging error".
Standby time is Frequent use of the games.
too short.
Restrict use if necessary.
Speed search active.
Display illumination on.
Deactivate fast search (p. 52).
Switch off display illumination (p. 45).
Activate key lock (p. 60).
Unintentional keystrokes
(illumination!).
Charging error Battery totally discharged.
(charge icon
not displayed).
1) Plug in charger cable.
2) Wait up to 2 hours until the charge icon is
displayed.
3) Charge battery as usual.
Temperature out of range:
5° C to 40 °C.
Make sure the ambient temperature is right, wait a
while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and device interface, clean
them if necessary, then insert battery again.
No mains voltage.
Use different mains power socket, check mains
voltage.
Wrong charger.
Battery faulty.
Replace battery.
SIM error.
SIM card not correctly inserted.
Make sure that the SIM card is correctly
inserted (p. 8).
SIM card contacts dirty.
Clean the SIM card with a dry cloth.
Use 3 V SIM cards only.
SIM card with wrong voltage.
SIM card damaged (e.g. broken). Inspect the damage. Return the SIM card to service
provider.
64
Questions&Answers
Question
Possible causes
Possible solution
No connection to
network.
Signal weak.
Move higher, to a window or open space.
Outside GSM range.
SIM card not valid.
Contact the service provider.
New network not authorised. Try manual selection or select a different network
(p. 52).
Network barring is set.
Network overloaded.
Signal too weak.
Try again later.
Phone loses
network.
(p. 52). Switching the phone off and on may speed
this up.
Calls not possible. 2nd line set.
New SIM card inserted.
Set line 1 ꢉ(p. 51).
Check for new restrictions.
Load credit.
Charge limit reached.
Credit used up.
Certain uses of the Call restrictions are set.
phone not possible.
Barrings may be set by your service provider. Check
barrings (p. 50).
No entries possible Phonebook is full.
in Phonebook.
Delete entries in Phonebook (p. 24).
Set call divert to the mailbox (p. 48).
Delete messages (SMS), (p. 32) to make room.
Contact your service provider.
Voice mail does not Call divert to the mailbox
work
not set.
SMS (message)
SMS memory full.
Tflashes.
Function cannot
be set.
Not supported by service
provider or registration
required.
Memory problems Phone memory full.
with ringtones, pic-
tures, SMS.
Delete files where necessary.
65
Questions&Answers
Question
Possible causes
Possible solution
Message cannot
be sent.
Some service providers do not sup- Check with your service provider.
port this service.
Phone number of the service centre Set service centre (p. 37).
is not set or is wrong.
SIM card contract does not support Contact your service provider.
this service.
Service centre overloaded.
Repeat message.
Check.
Recipient does not have a com-
patible phone.
EMS pictures &
sounds are not dis-
played at the destina-
tion phone
The destination phone does not sup-
port the EMS standard.
PIN error / PIN2 error. Three wrong entries.
Enter the PUK (MASTER PIN) provided
with the SIM card according to the instruc-
tions. If the PUK (MASTER PIN) has been
lost, contact your service provider.
Phone code error.
Three wrong entries.
Contact Siemens Service (p. 66).
Contact your service provider.
Service provider code No authorisation for this service.
error.
Too few/too many
menu entries.
Functions may have been added or Check with your service provider.
removed by your service provider via
the SIM card.
Charge counter does Charge pulse not transmitted.
not work.
Contact your service provider.
Damage
Severe shock.
Remove battery and SIM and insert them again. Do not dismantle phone!
nector contacts thoroughly. Stand unit upright in an air current. Do not dismantle
phone!
Reset settings to the factory default (p. 51): # 9 9 9 9 # A
*
66
Customer Care
om
re
We offer fast, individual advice! You have
If repair work is necessary, please contact
one of our service centres:
several options:
Abu Dhabi.........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brazil............................................0 80 07 07 12 48
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
China ...........................................0 21 50 31 81 49
Croatia ..............................................0 16 10 53 81
Czech Republic...............................02 33 03 27 27
Denmark ..............................................35 25 86 00
Dubai ................................................0 43 96 64 33
Egypt.................................................0 23 33 41 11
Estonia.................................................06 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany......................................0 18 05 33 32 26
Greece.........................................0 80 11 11 11 16
Hong Kong...........................................28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland ...................................................5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 66 76 44 00
Ivory Coast...........................................05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.....................................................2 72 37 17
Kuwait....................................................2 45 41 78
Latvia .....................................................7 50 11 18
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 52 74 20 10
Luxembourg........................................ 43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Our online support on the Internet:
We can be reached any time, any place.
You are given 24 hour support on all
aspects of our products. Here you will find
an interactive fault-finding system, a
compilation of the most frequently asked
questions and answers, plus user guides
and current software updates to
download.
You will also find the most frequently
asked questions and answers in the
section entitled "Questions&Answers"
(p. 63) in this user guide.
You can also get personal advice about our
range of products on our Premium Hotline:
United Kingdom .................. 0906 9597500
(0.75 £ per minute)
Qualified Siemens employees are waiting to
offer you expert information about our
products and installation.
In some countries repair and replace
services are impossible where the products
are not sold through our authorised dealers.
When calling customer service, please have
ready your receipt and the phone identity
number (IMEI, to display press # 0 6 #), the
*
software version (to display, press # 0 6 #,
*
then info) and if available, your Siemens
Service customer number.
67
Customer Care
Malta.......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman........................................................79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 22 84 85
Singapore ............................................62 27 11 18
Slovak Republic..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 22 68 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 31 95 78
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam................................................45 63 22 44
Zimbabwe ............................................04 36 94 24
68
Care and maintenance
d
ance
Your phone has been designed and
manufactured to the highest of
standards and should be treated
with great care and attention. The
suggestions below will help you to
enjoy your phone for many years.
The suggestions given above apply
equally to your phone, battery,
charger and all accessories. If any of
these parts are not working properly,
take them to your nearest qualified
service outlet. The personnel there
will assist you and, if necessary, re-
pair the device.
• Protect your phone from moisture
and humidity! Precipitation, hu-
midity and liquids contain miner-
als that will corrode electronic
circuits. Nevertheless, should your
phone become wet, disconnect it
immediately from the power sup-
ply and remove the battery!
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may become damaged.
• Do not store the phone in hot are-
as. High temperatures can shorten
the life of electronic devices, dam-
age batteries and warp or melt
certain plastics.
• Do not store your phone in cold ar-
eas. When the phone warms up
again (to its normal ambient tem-
perature), moisture can form in-
side the phone, which may
damage electronic circuit boards.
• Do not drop, knock or shake your
phone. Rough handling can dam-
age internal circuit boards!
• Do not use harsh chemicals, clean-
ing solvents, or strong detergents
to clean the phone!
69
Specifications
a-
Declaration of conformity
Phone ID
Siemens Information and Communi-
cation mobile hereby declares that
the phone described in this user
guide is in compliance with the
essential requirements and other
relevant provisions of European
Directive 1999/5/EC (R&TTE).
You will need the following details if you
lose your phone or SIM card. Please enter
here
the number of the SIM card (on the card):
..............................................................
15-digit serial number of the phone (under
the battery):
..............................................................
Customer Service number of the service
provider:
The declaration of conformity (DoC)
concerned has been signed. Please
call the company hotline if you re-
quire a copy of the original.
..............................................................
Lost phone
Technical data
If you lose your phone or SIM card contact
your service provider immediately to pre-
vent misuse.
GSM class
Frequency range: 880-960 MHz
GSM class: 1 (1 Watt)
Frequency range: 1,710-1,880 MHz
4 (2 Watt)
Weight:
84 g
Dimensions:
103x46x21.5 mm
(75 ccm)
Li-Ion battery:
700 mAh
Operating
temperature:
-10 °C to 55 °C
Standby time:
Talk time:
SIM card:
SAR:
60 h - 300 h
90 min - 360 min
3.0 V
0.56 W/kg*
* This applies to the phone together with the
front and back covers and keypad supplied
with the phone.
70
SAR - European Union (RTTE)
INFORMATION ON RF EXPOSURE /
SPECIFIC ABSORPTION RATE (SAR)
with the European Norm EN 50361.
This involves measuring the maxi-
mum value in all frequency bands of
the mobile phone with the phone
transmitting at its highest power le-
vel. The actual SAR level of the pho-
ne during normal operation may be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
n
RTTE)
THIS MOBILE PHONE MEETS THE LI-
MITS SET BY THE EU (1999/519/EC)
FOR PROTECTION OF THE HEALTH
OF THE PUBLIC FROM THE EFFECTS
OF EXPOSURE TO ELECTROMAGNE-
TIC FIELDS
These limits are part of comprehen-
sive recommendations for the pro-
tection of the public. The recom-
mendations were developed and
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific stu-
dies*. The limits include a substanti-
al safety margin designed to assure
the safety of all persons, regardless
of age and health.
The highest SAR value for this model
phone when tested for compliance
against the norm is
0.56 W/kg****.
The SAR information can also be
found on the Siemens web site at
While there may be differences
between the SAR levels of various
phones and at various positions, all
Siemens products meet the legal
requirements.
Before a radio equipment may be
placed on the market, compliance
with the European laws and the re-
spective technical limit require-
ments must be demonstrated. Only
then the CE mark may be affixed**.
The limit for mobile phones recom-
mended by the Council of the Euro-
pean Union employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. This SAR li-
mit is 2.0 W/kg***. This corresponds
with the requirements of the Inter-
national Commission for Non-Ioni-
zing Radiation Protection ICNIRP and
was adopted into the European
Norm for Mobile Radio Equipment
EN 50360. The SAR of mobile pho-
nes is determined in accordance
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzer-
land) states that present scientific in-
formation does not indicate the
need for any special precautions for
use of mobile phones.
71
SAR - European Union (RTTE)
Further information:
** The CE mark confirms that the
product is in compliance with the le-
gal requirements of the European
Union as a prerequisite for the pla-
cing on the market and the free mo-
vement of goods within the Euro-
pean internal market.
*** averaged over 10g body tissue.
**** SAR values may vary depen-
ding on national requirements and
frequency bands. SAR information
for different regions can be found at
72
SAR - International (ICNIRP)
ter- INFORMATION ON RF EXPOSURE /
low the maximum value. This is
because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
SPECIFIC ABSORPTION RATE (SAR)
THIS MOBILE PHONE MEETS THE LI-
MITS FOR PROTECTION OF THE
HEALTH OF THE PUBLIC FROM THE
EFFECTS OF EXPOSURE TO ELECTRO-
MAGNETIC FIELDS
The highest SAR value for this model
phone when tested for use at the ear
is
Your mobile phone is a radio trans-
mitter and receiver. It is designed
and manufactured not to exceed the
limits for exposure to radio frequen-
cy (RF) energy recommended by in-
ternational guidelines from the In-
ternational Commission on Non-
Ionizing Radiation Protection (IC-
NIRP). These limits are part of com-
prehensive guidelines for the protec-
tion of the public and establish
0.56 W/kg***.
SAR information can also be found at
While there may be differences bet-
ween the SAR levels of various pho-
nes and at various positions, they all
meet the international guidelines for
safe RF exposure.
permitted levels of RF energy for the
population. The guidelines were
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific stu-
dies*. The limits include a substanti-
al safety margin designed to assure
the safety of all persons, regardless
of age and health.
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzer-
land) states that present scientific in-
formation does not indicate the
need for any special precautions for
use of mobile phones.
The exposure limit for mobile pho-
nes employs a unit of measurement
known as the Specific Absorption Ra-
te, or SAR. The SAR limit stated in the
international guidelines is 2.0 W/
kg**. Tests for SAR are conducted in
all frequency bands using standard
operating positions with the phone
transmitting at its highest power le-
vel. The actual SAR level of the pho-
ne during operation can be well be-
Further information:
** averaged over 10g of tissue.
*** SAR values may vary depending
on national requirements and fre-
quency bands. information for diffe-
rent regions can be found at
73
Accessories
ries
Fashion and Carry
CLIPit Covers
Car Solutions
Car Kit Portable HKP-500
Exchangeable top and bottom covers can be
obtained from your mobile retailer or visit our
online shop.
Handsfree kit with integrated loudspeaker
and microphone and auto answer feature.
Simply plug into the cigarette lighter socket.
Ideal for mobility between vehicles.
Carrying Cases
A range of cases can be obtained from your
mobile retailer or visit our online shop.
Basic Car Pack HKB-500
Allows handsfree talking and simultaneously
charges the mobile phone in the car. Fea-
tures a Car Charger, a Headset PTT and a
Y- Adapter.
Products can be obtained in specialist
shops. Visit our online shop under:
Energy
Li-Ion Battery (700 mAh) EBA-510
Spare battery.
Travel Charger
Original Siemens Accessories
Travel Charger ETC-500 (EU)
Travel Charger ETC-510 (UK)
Travel charger with an extended input volt-
age rate of 100-240V.
Car Charger ECC-500
Charger for the cigarette lighter socket in
your car.
Desk Top Charger EDC-510
The desktop charger enables convenient
charging of the mobile phone and an addi-
tional battery.
Handsfree Portable
Headset PTT HHS-510
Headset with PTT key for accepting and
ending calls.
74
Quality declaration for battery
The capacity of your mobile phone
battery is reduced each time you
charge/discharge it. Storing the bat-
tery at temperatures that are too
high or too low also causes a gradual
loss of capacity. This can cause the
operating times of your mobile
phone to reduce significantly per
usage cycle.
on
ry
The battery is, however, designed to
be charged and fully discharged
within a period of six months from
when the mobile phone was pur-
chased. Following this six-month
period, we recommend replacing
your battery if you experience a sig-
nificant drop in performance. Only
purchase original Siemens batteries.
75
Guarantee certificate (UK)
ee Without prejudice to any claim the user (cus-
• Any other claims resulting out of or in con-
nection with the device shall be excluded
from this Guarantee. Nothing in this Guar-
antee shall attempt to limit or exclude a
Customers Statutory Rights, nor the man-
ufacturer's liability for death or personal in-
jury resulting from its negligence.
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
change in the burden of proof to the detri-
ment of the customer.
To invoke this Guarantee, please contact the
Siemens telephone service. The relevant
number is to be found in the accompanying
user guide.
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer's Guarantee under the condi-
tions set out below:
te
• In the case of new devices and their com-
ponents exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at
its own option and free of charge, either re-
place the device with another device re-
flecting the current state of the art, or
repair the said device. In respect of parts
subject to wear and tear (including but not
limited to, batteries, keypads, casing), this
warranty shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if the de-
vice defect is attributable to improper treat-
ment and/or failure to comply with
information contained in the user manuals.
• This Guarantee shall not apply to or ex-
tend to services performed by the author-
ised dealer or the customer themselves
(e.g. installation, configuration, software
downloads). User manuals and any soft-
ware supplied on a separate data medium
shall be excluded from the Guarantee.
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee de-
fault becoming evident.
• Ownership of devices or components re-
placed by and returned to Siemens shall
vest in Siemens.
• This Guarantee shall apply to new devices
purchased in the European Union. For
Products sold in the United Kingdom the
Guarantee is issued by Siemens plc,
Siemens House, Oldbury, Bracknell,
Berkshire, RG12 8FZ.
76
Guarantee certificate (IRL)
ee Without prejudice to any claim the user (cus-
downloads). User manuals and any soft-
ware supplied on a separate data medium
shall be excluded from the Guarantee.
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee de-
fault becoming evident.
• Ownership of devices or components re-
placed by and returned to Siemens shall
vest in Siemens.
• This Guarantee shall apply to new devices
purchased in the European Union. For
Products sold in the Republic of Ireland the
Guarantee is issued by Siemens Ireland
Limited, Ballymoss Road, Sandyford In-
dustrial Estate, Dublin 18 - The Republic of
Ireland.
• Any other claims resulting out of or in con-
nection with the device shall be excluded
from this Guarantee. Nothing in this Guar-
antee shall attempt to limit or exclude a
Customers Statutory Rights, nor the man-
ufacturer’s liability for death or personal in-
jury resulting from its negligence.
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
change in the burden of proof to the detri-
ment of the customer.
To invoke this Guarantee, please contact the
Siemens helpdesk on 1850 777 277. This
number is also to be found in the accompa-
nying user guide.
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer’s Guarantee under the condi-
tions set out below:
te
• In the case of new devices and their com-
ponents exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at
its own option and free of charge, either re-
place the device with another device re-
flecting the current state of the art, or
repair the said device. In respect of parts
subject to wear and tear (including but not
limited to, batteries, keypads, casing), this
warranty shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if the de-
vice defect is attributable to improper care
or use and/or failure to comply with infor-
mation contained in the user manuals. In
particular claims under the Guarantee
cannot be made if:
• The device is opened (this is classed as
third party intervention)
• Repairs or other work done by persons not
authorised by Siemens.
• Components on the printed circuit board
are manipulated
• The software is manipulated
• Defects or damage caused by dropping,
breaking, lightning or ingress of moisture.
This also applies if defects or damage was
caused by mechanical, chemical, radio in-
terference or thermal factors (e.g.: micro-
wave, sauna etc.)
• Devices fitted with accessories not author-
ised by Siemens
• This Guarantee shall not apply to or ex-
tend to services performed by the author-
ised dealer or the customer themselves
(e.g. installation, configuration, software
A
Alarm tones .....................................44
All calls, divert ................................. 48
Auto display
call duration/charges.................. 29
clock .............................................50
B
Battery
Bitmap style.....................................45
Busy number....................................17
C
Call
several simultaneously...............18
swap (toggling)........................... 18
Call back...........................................17
78
E
My phone ........................................ 15
F
Fast access .......................................56
G
Group
H
Network
Hide ID..............................................46
setup ............................................ 51
I
Own greeting.................................. 45
Inbox, SMS.......................................32
K
L
Phone ID (IMEI)............................... 51
Phone identity number (IMEI)....... 51
Phone memory ............................... 24
Limit, duration/charges.................. 29
Line selection, connection............. 51
Logo (provider logo).................40, 45
Phonebook
SIM card
insert.............................................. 7
text entry with "T9" .................... 34
to group................................. 26, 27
write............................................. 33
assign picture ..............................25
in SMS ....................................31, 36
PIN
PIN 2 ................................................. 13
SMS...............................................37
Q
R
Reset Phone .....................................51
Ring tones, sounds....................41, 44
Ringer setting ..................................43
80
Software version ............................. 62
Standby time ................................... 60
Swap................................................. 18
Switch on/off phone.......................10
U
T
T9
Time/Date setting......................49, 50
Top cover, my-CLIPit™..............15, 73
Two phone numbers ...................... 62
|